AUTOTRONIK-SMT GmbH
Sulzbacher Str. 111
92224 Amberg, Germany

Tel +49 (0) 9621-600 691
Fax +49 (0) 9621-600 692
Mail office@autotronik-smt.com

www.autotronik-smt.de
AUTOTRONIK LOGO
PRODUKTE
HOME 2 2 2
PRODUKTE
SMT-SCHABLONENDRUCKER
SMT-BESTUECKER
LOETMASCHINEN
ZUBEHÖR
ÜBER AUTOTRONIK
MESSEN
SUPPORT
KONTAKT
VERTRIEBSPARTNER
DISTRIBUTORS
HOME SITE MAP IMPRESSUM DEUTSCH HOME SITE MAP IMPRESSUM
 
BA388V2 MODELL: BA388V2
SMD-BESTÜCKUNGSAUTOMAT

DETAILS  

BA388 using welded steel frame and also heavy duty high precision Linear Ball Rail system to provide strong, rigid and long life time mechanism.

 
Enormous 1100 mm x 410 mm Placement Area with 256 Smart Tape Feeders; 1250 mm x 350 mm Placement Area with 192 Feeders and Conveyor
Enormous 1100 mm x 408 mm Placement Area with 256 Smart Tape Feeders; 1200 mm x 408 mm Placement Area with 192 Feeders and Conveyor
48-Port Smart Feeder Bases can be mounted on both the front and rear of the BA388 and 32-Port Smart Feeder Bases can be mounted on the left and right sides of the machine for a maximum capacity of 256 feeders. In this stand-alone configuration, a huge 1100 mm x 410 mm can be shared by PCBs and waffle trays. Placement area increases to 1250 mm x 350 mm with feeder bases mounted on only the front and rear of the system and an in-line conveyor installed.
 
COGNEX® Alignment System "Vision on the Fly"
The BA388 features COGNEX® vision processing and head-mounted for non-contact “Vision on the Fly” alignment. The machine BA388 assures high-precision placement of the full range of SMDs, from the smallest 0201 devices through CSPs, µBGAs, flip-chips, ultra-finepitch QFPs (0.3mm fine pitch), even odd-form components.
 
Bottom Vision Alignment System (Option)
Bottom Vision Alignment System
A Bottom Vision Camera is used for large components up to 150 x 100 mm and devices with alignment features on their bottom side.
 
Besides the standard fiducial mark, either square SMD PCB pad or plate-through hole also can be trained as fiducial mark.
 
Dual-conveyor system available as option
Dual conveyor in action will shorten the machine idle time in PCB board loading / unloading. The overall placement speed will hence be increased effectively.
Powerful Windows®-Based Control Software
Powerful Windows®-Based Control Software
Intelligent software allows the easy set up for the complex and repeatable LED programming.
 
Universal CAD Conversion
Beside the direct input of data by teach-in camera, an optional CAD conversion program for directly transfer of CAD generated pick and place data is available.
 
Auto Tape Feeder (KFTA)
Auto Tape Feeder (KFTA)
The innovative design of KFTA feeder bases and mounting hardware allows almost limitless flexibility in feeder combinations and arrangement schemes, as almost every feeder can be ordered, loaded, programmed and mounted independently. KFTAs are available from 8 mm up to 72 mm tape width.
 
Universal IC Tube Feeder
Universal IC Tube Feeder
KFTB universal tube feeder are using vibration driven technique. It is able to handle IC-Sticks with max.50 mm width.
 
Cut Strip Tape Holders

Cut Strip Tape Holders is a handy accessory for presenting components that are supplied in short lengths of tape due to their low quantity of usage. It can also prevent the waste of components in sections of tape that are too short to be loaded into tape feeders.

 
Bulk Pack Component Tray
Designed for bulk pack component, Bulk Pack Component Tray (TSD18) can handle any bulk pack component under the semi-auto production mode. A single tray contains 18 individual slots for maximum 18 types of components.
 
IC Tray Holder
The standard TS-1 Tray Holder occupies approximately 330mm X 140mm of work area and is designed to hold a standard 316mm X 136mm JEDEC Matrix Tray. The TS-1 provides adjustability for wide variety of smaller matrix tray and waffle pack combinations and can easily be modified for custom tray configurations.
 
Dispenser System
Dispenser System
Optional stand alone dispenser head for adhesive & solder paste dispensing. Perfect for quick, small volume production without making stencil.
 
TEFLON LED Nozzle
TEFLON made LED nozzle in Autotronik BA388 machine, together with the positive air outputting pressure, is specialized design for LED application. The innovative design of Nozzle ensures the effective landing of sticky LED components.
 
Vision Inspection
With the built-in software, the camera can automatically move and display the image in the computer screen, user can manually check the printing accuracy of solder paste, quality of the soldering, accuracy of component placement, etc.
 
Remote Service Kit
Optional Remote Service Kit allows a remote access to machine by Internet, so that programming, calibration and service can be done by our worldwide remote service center.
 
 
SPECIFICATION


Number of Heads
(Vision on the Fly):
2


Placement rate: 6400 CPH (under the optimum condition)
5500 CPH (IPC9850 Chip 1608)


Feeder capacity (8 mm)
without conveyor:
up to 256 Tape Feeders


Feeder capacity (8 mm)
with conveyor:
up to 192Tape Feeders

IC Tray capacity: up to 6 Waffle Trays






Component Size:

Handled by head camera:
- Smallest: 0.6 x 0.3 mm
- Largest: 16 x 14 mm

Handled by fixed Bottom Vision Camera:
- Smallest: 0.4 x 0.2 mm (option)
- Largest: 150 x 100 mm (option)


Resolution: X / Y axis 0.005 mm Servo Motor
Z axis 0.02 mm Servo Motor

Rotation:
0 to 360° (0.045°/step) Servo Motor

Placement Accuracy: +/- 0.03 mm
X-Y Repeatability: +/- 0.01 mm


Placement area: Max. 1100 x 410mm without conveyor
Max. 1250 x 350mm with conveyor



Programming: Direct input
Vision teach-in
CAD Access (Option)
Component Sense: Vision detection
Main Control: Industrial PC

Machine Size: (L x W x H) 1780 x 1370 x 1395 mm
Weight: 1200 kg
Power: 230 V / AC, 2800 W
Pressure: 75 psi (5.5 bar)
 
* We reserve the right to make changes without notice.
 
< Zurück >
 
 
Copyright © 2011 by Autotronik-SMT GmbH. All Rights Reserved.
  HOME SITE MAP IMPRESSUM DEUTSCH BOTTOM VISION KAMERA AUTO TAPE FEEDER & UNIVERSELLE IC-STRANGENZUBRINGER VISION ON THE FLY HEAD OPTISCHE INSPEKTION TRANSPORTBANDSYSTEM OPTISCHE INSPEKTION